Motorized ball valve are usually applied to control the on-off of air-conditioning water system. It consists of the actuator and the valve body. The actuator adopts the sychronous motor driver to the valve body move with 90 degree rotation. It has built-in limit relay contact, which can cut off the power when the valve is fully open or closed.
Electric three-way ball valve consists of actuator and brass valve.
Made of fine quality brass with stable performance.
Actuator performance characteristics: Low noise, durability, 3-wire 2-way control.
Actuator three-wire and two-control. Product occupies small external space. It can be installed close to the wall.
Wiring is flexible, convenient, reliable and durability. It is easy to debug and maintain the system. It can be controlled manually.
Suitable for medium of water, gas, oil.
This 3 way 3-wire ball valve can rotate 90 degrees.
DN15, DN20 and DN25 three models for you to choose.
Type: DN15, DN20, DN25 (optional)
Model: DC 12V
Working Temperature: 2-90 ℃
Body pressure: 1.6 MPA
Applicable Media: water, air, oil
Connection Mode: ZG internal pipe thread
Motor: Synchronous motor
Control Method: 3 Way 3-Wire
IP Grade: IP54
Valve Body Material: forging brass, nickel plated surface
Actuator Material: outer cover: ABS, PC engineering plastics
Item Weight: 483g / 1.06lb
Package Weight: 511g / 1.12lb
Item Weight: 616g / 1.36lb
Package Weight: 644g / 1.42lb
Item Weight: 760g / 1.68lb
Package Weight: 787g / 1.74lb
Package Size: 140 * 90 * 80mm / 5.51 * 3.54 * 3.15in
Please allow a slight error due to manual measurements.
Due to the different monitor and light effect, the actual color maybe a slight different from the picture color.
The actuator must be on the horizontal line.
Do not put big force to the actuator during installation.
The screw thread of the valve must be international standard of tube screw, please do not use taper screw thread to connect the valve.
Before installation, the valve and the pipe line must be kept clean. Please make sure there are no sundries.
The valve and pipeline should be installed horizontally or vertically, but upside-down is forbidden.
Please keep the temperature of pipeline and the valve. Do not put the actuator inside of protected cover.
1 * Ball Valve
1 * Manual